Autonomous searchlight VIDEX VL-FSO-205-S, which works completely autonomously and is charged from a solar panel. Using this spotlight, you will be completely independent of problems with a possible lack of electricity in your home or country house, since the battery (built into the spotlight) is charged during the whole day from the sun, so it can work autonomously up to 12 hours.

It is advisable to use this LED floodlight wherever there is no possibility to connect to the mains or the load on the mains is very limited.

The main advantage of using a solar-powered spotlight is the absence of any electricity costs, as well as:

• The light source is LEDs that provide high-quality, uniform and directional lighting;
• Long service life without the need for maintenance;
• Protection according to the IP65 standard allows the floodlight to be used in all weather conditions;
• Fast and convenient installation; It is recommended to fully charge the projector before first use.

Characteristics:

• Light color temperature: 5000K (daylight)
• Light quality: Ra > 80
• Voltage: 3.2V
• Power: 20W
• Luminous flux: 600 Lm
• Beam Angle: 90°
• Power factor: 1
• Battery type: LiFePO4
• Solar panel power: 10W 6V panel
• Battery capacity: 5Ah
• Work resource: 30000g
• Panel dimensions: 350mm x 280mm x 17mm
• Spotlight dimensions: 145mm x 128mm x 40mm
• Quantity in a box: 5 pcs
• Protection class, IP: 65
• Warranty period: 2 years
• Materials: Aluminum
• Weight: 1900g

It is recommended to fully charge the projector before first use. To turn on the LED spotlight, press the "ON" button on the remote control. Turning the LED spotlight on and off is forced regardless of the time of day. Using the remote control, you can select the desired mode and adjust the brightness of the spotlight.

Modes:

• The "3H" mode turns on the spotlight at night for 3 hours.
• The "5H" mode turns on the spotlight at night for 5 hours.
• The "8H" mode turns on the spotlight at night for 8 hours.
• AUTO mode: Press the AUTO button, the spotlight will flash a short flash once. The "AUTO" button activates the automatic spotlight mode: the first hour - 100% brightness; second hour - 80% brightness; from the third to six hours inclusive - 60% brightness; seven hours - 50% brightness; from eight hours to turn off - 30% brightness.

The "M" button allows you to select the motion sensor modes:

• Mode A: Press the "M" button, the projector will give a short light signal TWICE. In this mode, the spotlight reacts and illuminates at 100% brightness when moving and 20% when not moving.
• Mode B: Press the "M" button, the floodlight will give a short light signal THREE. The light turns on at 100% brightness when there is movement and turns off after a minute when there is no movement. To disable the modes, press the "M" button after mode B. When the ambient illumination is below 50 lx, the spotlight turns on and works in automatic mode.

The spotlight remembers the presets and applies them the next time it is turned on.